Dedicated
Integrated Lights-Out 2 (iLO 2) management port (optional)
8.
Power Button, UID Button, and Front
LED Indicators
9.
Support
for up to four Hot Plug SATA or SAS Hard Drives
11.
NIC
1 Port / Shared iLO 2 Management Port
10.
Two
PCI-Express Slots (2 PCI-Express x8 connectors standard)
12.
Keyboard
connector
What's New
New Quad-Core Intel Xeon processors with up to 12 MB L2 cache for
1333MHz Front Side Bus
Adding to line up of Quad-Core and Dual-Core Intel processors
for more performance, flexibility and choice
Support for low-cost Intel Celeron 440
At a Glance
The HP ProLiant DL320 G5p Server is an enterprise rack-optimized server
at an entry level price. The highly manageable 1 processor, 1U server
is ideal for single-application IT infrastructure, web and edge-of-network
applications requiring enterprise-class management features. Optional
upgrades provide support for hot-plug SAS drives and/or up to 4 SAS or
SATA drives, and gives the DL320 G5p the flexibility to meet the needs
of your datacenter. Plus, you get the cost-effective solution of a single-processor
platform with the performance advantages of dual-core or quad-core.
Processor:
Quad-Core Intel® Xeon® 3300 processor sequence
Quad-Core Intel® Xeon® 3200 processor sequence
Dual-Core Intel® Xeon® 3100 processor sequence
Dual-Core Intel® Xeon® 3000 processor sequence
Dual-Core Intel® Core™2 E4600 processor
Dual-Core Intel® Pentium® E2160 processor
Single-Core Intel® Celeron® 440 and 420 processors
Intel® 3210 Chipset with up to 1333MHz Front Side Bus (FSB)
Memory:
Supports up to 8 GB of PC2-6400 (800 MHz) Unbuffered DDR2 ECC SDRAM
Memory
4 DIMM sockets
Storage Controller:
4 Port SATA Controller with RAID 0/1 support NOTE: Transfer rate: 1.5Gb/s
SATA
Internal Drive Support:
Up to four 3.5" (Large Form Factor) SATA or SAS hard drives
Two drive cage standard. Optional 4 HDD cage upgrade kit
SAS drives require optional SAS Host Bus Adapter (HBA) or Smart
Array Controller
Optional hot plug hard drive configuration
Internal storage capacity of up to 4TB (4 x 1TB SATA hard drives)
with optional 4HDD cage
Optional DVD, DVD Combo or DVD-RW drive (depending on 2 or 4 HDD
model)
Network Controller:
Embedded NC326i Dual Port Gigabit Server Adapter
Expansion Slots:
Two total slots:
(1) Full length PCI Express x8 slot (x8 connector)
Can be replaced with a full-length 64-bit /133MHz PCI-X slot
Up to 5 Total: (2) front; (1) internal (optional); (2) rear accessible
ports
Internal USB port (optional) for flexible storage, security, or
USB drive key deployment
Infrastructure Management:
Convenient slide-out Systems Insight Display for quick and easy
front view server diagnostics, along with status LEDs, Automatic
Server Recovery (ASR), ROM Based Setup Utility (RBSU)
HP ProLiant Onboard Administrator (powered by the Integrated Light-Out
2 management processor) for simplified server setup, health monitoring
and recovery, power and thermal control, and lights-out remote administration
HP Insight Control (ICE) suites, as product options, deliver essential
infrastructure management that can help save time and money by making
it easy to deploy, monitor, control and optimize your IT infrastructure
through a single, simple management console. ICE suites support
both Windows and Linux-based servers and management consoles.
HP Insight Dynamics - VSE suite for ProLiant servers, a product
option, is an integrated command center that enables you to continuously
analyze and optimize your adaptive infrastructure. This advanced
infrastructure management software lets you reduce the cost of common
data center tasks by as much as 40 percent while keeping pace with
your changing business
Operating Systems and Virtualization Software Support for ProLiant
Servers:
Supports Windows, RHEL, SLES, OEL
Deployment/Serviceability:
System Insight Display on the front bezel for quick and easy server
diagnostics
Customer Self Repair (CSR): HP products are designed with many CSR
parts to minimize repair time and allow for greater flexibility in
performing defective parts replacement
Fixed, mounting rails included with all models
Form Factor:
1U (1.70" / 4.32 cm) Rack Mount Chassis
26.85" (68.20 cm) Deep
Warranty:
This product is covered by a global limited warranty and supported
by HP Services and a worldwide network of HP Authorized Channel Partners.
Hardware diagnostic support and parts repair is available for three
years Next Business Day, with one year on-site support from date of
purchase. Support for software and initial setup is available for
90 days from date of purchase. Expanded support may be covered under
the warranty or available for an additional fee. Enhancements to warranty
services are available through HP Care Pack services or customized
service agreements. SATA hard drives have a one-year warranty. NOTE: Server Warranty includes
three year parts, one year labor, and one year on-site support with
next business day response. Warranty repairs may be accomplished through
the use of Customer Self Repair (CSR) parts. These parts fall into
two categories: 1) Mandatory CSR parts are designed for easy replacement.
A travel and labor charge will result when customers decline to replace
a Mandatory CSR part; 2) Optional CSR parts are also designed for
easy replacement but may involve added complexity. Customers may choose
to have HP replace Optional CSR parts at no charge. Additional information
regarding worldwide limited warranty and technical support is available
at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
NOTE:
For a brief, printer friendly data sheet that describes this product
and informs you of the essential capabilities and specifications, please
visit: http://h71028.www7.hp.com/ERC/downloads/4AA1-5500ENW.pdf. NOTE: For the Standard Features shipped in the "Factory Integrated
Models", please see the "Configuration Information - Factory Integrated
Models" section.
Processor One of the following depending on Model
Quad-Core Processors
Quad-Core Intel® Xeon®
Processor X3370 (3.0 GHz, 12MB L2 cache, 95 Watts, 1333MHz FSB) NOTE: Available via CTO only.
Quad-Core Intel® Xeon®
processor X3360 (2.83GHz, 12MB L2 cache, 95 Watts, 1333MHz Front Side Bus
(FSB)) NOTE: Available via CTO only.
Quad-Core Intel® Xeon®
processor X3350 (2.66GHz, 12MB L2 cache, 95 Watts, 1333MHz FSB) NOTE: Available via CTO only.
Quad-Core Intel® Xeon®
Processor X3330 (2.66 GHz, 6MB L2 cache, 95 Watts, 1333MHz FSB) NOTE: Available via CTO only.
Dual-Core Intel® Xeon®
processor 3065 (2.33GHz, 4MB L2 Cache, 65 Watts, 1333MHz FSB) NOTE: Available via CTO only.
Dual-Core Intel® Core™2
processor E4600 (2.4GHz, 2MB L2 cache, 800MHz FSB) NOTE: Available via CTO only.
Dual-Core Intel® Core™2
processor E4400 (2.0GHz, 2MB L2 cache, 800MHz FSB) NOTE: Available via CTO only.
Dual-Core Intel® Pentium®
processor E2160 (1.80GHz, 1MB L2 cache, 800MHz FSB) NOTE: Available via CTO only.
Single-Core Processors
Single-Core Intel® Celeron®
processor 440 (2.00GHz, 512KB L2 cache, 800MHz FSB) NOTE: Available via CTO only.
Single-Core Intel® Celeron®
processor 420 (1.60GHz, 512KB L2 cache, 800MHz FSB) NOTE: Available via CTO only.
Cache
Memory One of the following depending on Model
12
MB L2 Cache NOTE: For Models with Intel®
Xeon® processor X3370, X3360 and X3350.
8
MB L2 Cache NOTE: For Models with Intel®
Xeon® processor X3220 and X3210.
6
MB L2 Cache NOTE: For Models with Intel®
Xeon® processor X3330, X3320, E3120, and E3110.
4
MB L2 Cache NOTE: For Models with the
Intel® Xeon® processor 3075 and 3065.
2
MB L2 Cache NOTE: For Models with the
Intel® Core2 processor E4600 and E4400.
1
MB L2 Cache NOTE: For Models with the
Intel® Pentium processor E2160.
512
KB L2 Cache NOTE: For Models with the
Intel® Celeron processor 440 and 420.
Chipset
Intel® 3210
Chipset
Memory Protection
ECC
Memory One
of the following depending on Model
Type
PC2-6400
(800MHz) Unbuffered ECC DDR2 SDRAM Interleaving optional (Enabled when DIMMs
populated in pairs)
DIMM
Sockets
4
Standard
- Xeon E3110 and Xeon 3075 Models
1
GB (1 x 1 GB)
Standard
- Xeon X3320 and Xeon X3210 Models
2
GB (2 x 1 GB)
Maximum
Memory
8 GB
Network Controller
Embedded NC326i
Dual Port Gigabit Server Adapter
Expansion
Slots
Expansion
Slots #
Technology
Bus Width ***
Connector
Width
Bus Number*
Device
No.**
Form Factor
Notes
5 (Standard)
PCIe
x1
x8
10
0
Low
profile (half length, half height) slot
4 (Standard)
PCIe
x8
x8
21
0
Full
length, full height slot
This PCIe slot can
be replaced with optional PCI-X slot below
4 (Optional)
PCI-X
(133MHz, 3.3Volt)
64-bit
Not
applicable
24
4
Full
length, full height slot
*
Default bus assignment (in decimal). Inserting cards with PCI bridges may alter
the actual bus assignment number. ** Slots are enumerated differently based
on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with
the lowest bus). *** Indicates the number of physical electrical lanes running
to a PCI-e connector.
Storage
Controllers
Integrated Intel®
82801IR Serial ATA Host Controller with RAID 0/1 support. Hot Plug SAS and
SATA controllers available via PCI card option.
Storage
Optical
Drive
Optional
2 HDD Models: 12.7mm DVD-ROM, or DVD-RW Drive 4 HDD Models: 9.5mm DVD-ROM,
or DVD combo drive
Hard
Drives One of the following depending on Model
Hard Drives - Hot Plug SATA/SAS
Up
to 2 or 4 hot plug SATA or SAS 3.5" drives NOTE:
Hot-plug and/or SAS support requires optional HBA or Controller card.
Maximum
Internal Storage Type
SATA (2HDD
models - standard)
2.0TB
2 x 1TB SATA
SATA
(4HDD models - requires optional 4HDD cage)
4.0TB
4 x 1TB SATA
SAS
(2HDD models standard - requires optional PCI controller)
2.0TB
2 x 1TB SAS
SAS
(4HDD models - requires optional 4HDD cage and PCI controller)
NOTE: Maximum resolution
available via iLO 2 remote console is 1280 x 1024.
Form Factor
Rack (1U), (1.70 in/4.32 cm),
26.85" deep
Core Infrastructure
Management
HP Insight Foundation
Managing the growing number of servers can be complex and expensive for
your organization. IT managers need to address changing business needs
with tools that meet the challenges of managing today's complex Datacenters.
HP provides management solutions that are designed to simplify a server's
installation, configuration and maintenance throughout the entire server
lifecycle. This provides the customer with higher levels of operational
efficiency and highly reliable systems: www.hp.com/go/foundation.
HP ProLiant Onboard Administrator (powered by the HP Integrated Lights-Out
2 management processor) simplifies server setup, health monitoring, power
and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP ProLiant Onboard Administrator functions without
additional software, and can be accessed from any location via a web browser.
It works hand-in-hand with HP Systems Insight Manager, Insight Control
suites, and the Insight Dynamics-VSE suite helping customers unlock the
value of the ProLiant platform and deliver the highest possible quality
of IT service to the business. See www.hp.com/go/onboardadministrator
HP Insight Control (ICE) suites
HP Insight Control (ICE) suites,
as product options, deliver essential infrastructure management that can
help save time and money by making it easy to deploy, monitor, remote control,
and optimize your IT infrastructure through a single, simple management
console. ICE suites install and license software modules that are integrated
into HP System Insight Manager.
Two Insight Control suites are available, to serve environments requiring
either Linux-based or Windows-based management consoles: HP Insight Control
suite for Linux (ICE-LX), and HP Insight Control suite (ICE). See www.hp.com/go/insightcontrol
HP Insight Control suites include one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff and
proactive delivery of software updates. For more information about this
service, please visit: http://www.hp.com/services/insight.
HP Insight Dynamics - VSE suite
The HP Insight Dynamics - VSE
suite for ProLiant, a product option, is an integrated command center that
enables you to continuously analyze and optimize your adaptive infrastructure.
This advanced infrastructure management software that allows you to analyze
and optimize your adaptive infrastructure to manage physical and virtual
resources in the same way. HP Insight Dynamics - VSE gives you a powerful
toolkit to accelerate complex technology projects and simplify daily operations.
It enables you to plan capacity and power continuously, balance across physical
and virtual resources, ensure cost-effective high availability, and provision
infrastructure consistently.
HP Insight Orchestration, an optional extension to Insight Dynamics - VSE,
enables IT organizations to provision infrastructure consistently and automatically
from pools of shared resources using a self-service portal. Resources provisioned
can range from a single virtual machine to complex multi-tier environments
and their associated physical and virtual resource requirements.
HP Insight Recovery, also an optional extension for Insight Dynamics - VSE,
enables cost-effective disaster recovery for physical and virtual environments.
Application environments can be reactivated in minutes with the touch of
a button to a remote location
IPMI 2.0 NOTE: iLO 2 management processor
monitors fans, temperature sensors, power supply sensors and Vrms without
having the System Management Driver loaded. In addition to reporting sensor
status from all iLO 2 interfaces, the management processor also reports
sensor status to the operating system through an IPMI 2.0 specified interface.
Intelligent
Manageability
Automatic
Server Recovery (ASR) iLO 2 Advanced Pack (optional) HP Systems Insight
Manager Integrated Management Log Drive Parameter Tracking (with Smart
Array Controllers) Dynamic Sector Repairing (with Smart Array Controllers)
Pre-Failure Warranty (covers processors, SAS hard drives, and memory) BIOS
Serial Console Front and Rear Unit ID (UID) button/LED
Security
Power-on
password Keyboard password USB Port control Removable optical drive
assembly (optional) Removable DVD-ROM Drive Assembly (optional) Dedicated
iLO2 port (optional) Administrator's password
Server
Power Cords
One 6' Highline
(IEC-IEC) power cord ships standard
NOTE:
HP ProLiant DL320 G5p servers hip standard with a C13 to C14 2M Highline jumper
cord. If customers require a local power cord, they can check the power cord matrix
for the appropriate cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.
Power Supply
Auto-sensing 400-Watt PFC Power
Supply, CE Mark Compliant
UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable
matrix's on the HP Power Protection and Management page. Under Power Cords,
click on the "HP Power Cord Matrix" link. That link will list
cable descriptions, requirements, and specifications for UPS and PDU units.
Please see the following link: www.hp.com/products/powercords.
System
Fans
3 dual rotor fans ship standard
with X3370, X3360, X3350, X3330, X3320, and E3120, E3110 models.
4 dual rotor fans ship standard with all other models (e.g. X3220, X3210,
3075, 3065, E4600, E4400, E2160, 440 and 420 models).
Ultra
Thin Rack Deployment Overview
For the Ultra Thin Rack Deployment
Overview, including best practices for the HP ProLiant DL320 G5p, please
see the following URL: www.hp.com/servers/proliantdl320-g5p.
NOTE: Support differences will exist
between the SATA and SAS configurations. NOTE: For more information on HP's Certified and Supported ProLiant
Servers for OS and Virtualization Software and latest listing of software
drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport
and our driver download site www.hp.com/support/DL320G5p.
Rack
Airflow Requirements
Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 G2 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following
additional requirements to ensure adequate airflow and to prevent damage
to the equipment:
Front and rear doors: If your 42U server rack includes closing
front and rear doors, you must allow 5,350 sq cm (830 square inches)
of hole evenly distributed from top to bottom to permit adequate airflow
(equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and
the side panels of the rack must be a minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking panels to fill all remaining empty
front panel U-spaces in the rack. This arrangement ensures proper airflow.
Using a rack without blanking panels results in improper cooling that
can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation
Guide or the Documentation CD provided with the server, or to the server
documentation located in the Support section at the following URL: www.hp.com/servers/proliantdl320-g5p.
Rack Kit
Quick deploy rail system provides tool-free support for racks with square
or round mounting holes (including Compaq/HP 7000, 9000, 10000 G2 and
HP series), with an adjustment range of 24" - 36". The ambidextrous
cable management arm can be mounted on either the left or right side for
improved cable management.
Telco Rack Support
Support for all 2-post Telco racks requires the use of the standard rack
kit and an additional option kit from Rack Solutions at: http://www.racksolutions.com/hp/
HP
Factory Express Capabilities
HP Factory Express offers configuration, customization, integration and deployment
services for HP servers and storage products. Customers can choose how their factory
solutions are built, tested, integrated, shipped and deployed.
Factory
Express offers service packages for simple configuration, racking, installation,
complex configuration and design services as well as individual factory services,
such as image loading, asset tagging, and custom packaging. HP products supported
through Factory Express include a wide array of servers and storage: HP Integrity,
HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well
as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific
server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
Service and Support
HP Care Pack Services provide total care and support expertise with committed
response times designed to meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options
qualified for the server that are purchased at the same time or afterward
and internal to the enclosure. It also includes the 22-inch and smaller
external monitors and tower UPS options up to 3kVA. These items will be
covered at the same service level and for the same coverage period as
the server. Coverage of UPS Battery is not included and standard warranty
terms & conditions apply. For servers or storage systems installed
within a rack, service also covers all HP qualified rack options installed
within the same rack.
To fully capitalizing on your HP ProLiant servers' capabilities requires
a service partner who thoroughly understands your server technology and
systems environment. HP Services, an industry leader in provision of support
solutions provides a range of support services designed to meet the varying
needs of your business. Whether an SMB, or large global corporation, HP
has ProLiant server support offers to help you speedily deploy and maximize
system uptime.
Recommended Service - simplify ProLiant
solution implementation, maintenance, and management.
Support - 3 Year 9x5 Next Business Day
coverage, excluding HP holidays only
Deployment Service - HW Installation
only
Enhanced Service - optimize service level
to increase IT performance and availability.
Support - 3 Year 13x5 Same Business
Day, 4-Hour response coverage only
Deployment Service - Installation and
Start up only
Refer to the information on the Installation of a ProLiant on the ProLiant
Data Sheet; to be delivered on a scheduled basis 8am-5pm, M-F, excluding
HP holidays.
NOTE:
For the Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section.
The ProLiant Smart Buy program offers a collection of promotional server
and option products that are configured with SMB in mind, offered at discounted
prices, and positioned for quick delivery. Smart Buy server offers are
available for a limited time only.
Configuration Information - Factory Integrated Models
NOTE:
This section lists some of the steps required to configure a Factory Integrated
Model. To ensure only valid configurations are ordered, HP recommends the
use of an HP approved configurator. Contact your local sales representative
for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard
models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: FIO indicates that this option only available as a Factory
Installable Option.
Step
1: Base Configuration (choose one of the following configurable models)
Models
DL320G5p CTO (Configure-To-Order)
Chassis
445436-B21
Includes:
Embedded NC326i
Dual Port Gigabit Server Adapter
1 full length PCI
Express x8 slot and 1 half length low profile PCI Express x8 slot
Integrated Lights-Out
2 (iLO 2) embedded (shared NIC functionality standard)
Intel® 82801IR
Integrated Serial ATA Host Controller
Rack (1U) form factor,
(1.70 in/4.32 cm)
Fixed, mounting rails
Step
2: Choose Required Options (only one of the following from each list unless
otherwise noted)
Step
3: Choose Additional Options for Factory Integration
SAS HBAs
HP SC44Ge Host Bus
Adapter NOTE: When using the SC44Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5
Gb/s SATA, 3 Gb/s SAS.
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and
the server backplane) should operate at the same data transfer rate or the
system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: The previous
generation of 1.5G SATA drives are still supported. These drives can be
purchased as an option, however they are no longer configurable.
HP Insight Control
suite, No Media 1-Server License including 1 year of 24x7 Technical Support
and Updates NOTE: This part number can be purchased
as a single license or as multiple licenses with a single activation key.
Customer will receive a license entitlement certificate via e-mail. The
license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service. Only available directly from
HP and select resellers in the Americas region.
452148-B22
HP Insight Software
Media Kit NOTE: Insight Software DVD media
without licenses. Contains HP Systems Insight Manager and Insight software
products and components licensed by the Insight Control suite. Uses an integrated
installer to perform quick and accurate software installation and updates.
HP Insight Control
suite for Linux, Media pack (DVD) - No licenses included NOTE: This optional Media pack DVD
contains the ISO image for HP Insight Control suite for Linux, HP System
Insight Manager, HP Insight Power Manager, HP Virtual Machine Management
Pack, and an integrated installer. Servers must be acquired separately. NOTE: This Media pack is optional because the latest ISO image and
latest updates may be downloaded at no cost from: http://www.hp.com/go/ice-linux
(click on Download button).
464422-B22
HP Insight Control
suite for Linux, No Media, 1-Server license, including one year of 24x7
Technical Support and Updates NOTE: This part number can be used
to purchase one (1) license with a single activation key. Customer will
receive a printed license entitlement certificate via physical shipment.
The license entitlement certificate must be redeemed online or via fax in
order to obtain the license activation key(s). Includes one year of 24 x
7 HP Software Technical Support and Update Service. NOTE: One certificate is shipped for each license.
HP SA-P400 and SA-E500 24 In Battery
Cable Kit NOTE: This option kit contains a
24" battery cable and adhesive material for installing a batter into
the server if a Smart Array E500 or Smart Array P400 is integrated outside
of the factory. For all solutions, please refer to the server QuickSpecs
and User's Manual for detailed installation instructions.
HP SC44Ge Host Bus Adapter NOTE: When using the SC44Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5
Gb/s SATA, 3 Gb/s SAS.
HP 8 Internal Port SAS HBA with
RAID NOTE: The HP SC44Ge HBA and HP 8 Internal Port SAS HBA with RAID
require the purchase of the HP HBA SAS-SATA 4x1LN Cable Kit (452130-B21). NOTE: Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
HP StorageWorks 1U USB Rack-Mount
Kit with one DAT 160 USB Tape Drive NOTE: Pre-configured with one DAT
160 USB tape drive.
AG703A
SAS Rack-Mount
Tape Solutions NOTE: HP recommends purchasing the
HP SC44Ge HBA ( 416096-B21) for a dedicated SAS HBA for tape.
HP StorageWorks 1U SAS Rack-Mount
Kit with one LTO-4 Ultrium 1760 NOTE: Pre-configured with one LTO-4
Ultrium 1760 SAS tape drive.
HP StorageWorks 1U SAS Rack-Mount
Kit NOTE: Supports up to (2) half-height
SAS tape drives.
AE459A
HP StorageWorks LTO-2 Ultrium
448 SAS Internal Tape Drive NOTE: Mounts inside the 1U SAS Rack-Mount
Kit (AE459A)
DW085A
HP StorageWorks LTO-3 Ultrium
920 SAS Internal Tape Drive NOTE: Mounts inside the 1U SAS Rack-Mount
Kit (AE459A)
EH847A
NOTE: For an up-to-date
listing of the latest O/S and software support details for HP Ultrium tape
drives, please visit: http://www.hp.com/go/connect.
HP StorageWorks 1/8 G2 Tape Autoloader
HP StorageWorks 1/8 G2 LTO-4 Ultrium
1760 SAS Tape Autoloader
AK377A
HP StorageWorks 1/8 G2 LTO-3 Ultrium
920 SAS Autoloader
AH558A
HP StorageWorks 1/8 G2 Tape Autoloader
Rack Kit NOTE: Required to install the 1/8
G2 Autoloaders in a standard 19-inch rack; includes rails and rackmount
instructions.
AH166A
NOTE: Please reference
the Tape Autoloader QuickSpecs at: http://www.hp.com/go/automation
for additional information needed to create a complete solution.
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4
Ultrium 1760 SAS Drive Library
AK378A
HP StorageWorks MSL2024 1 LTO-3
Ultrium 920 SAS Drive Library
AH559A
HP StorageWorks MSL4048 Tape Library
HP StorageWorks MSL4048 2 LTO-4
Ultrium 1760 SAS Drive Library
AK380A
HP StorageWorks MSL4048 1 LTO-3
Ultrium 920 SAS Drive Library
AH560A
NOTE: Please reference
the MSL Tape Library QuickSpecs at: http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at: http://www.hp.com/go/ebs.
Disk-Based Backup
RDX Removable Disk Backup
HP StorageWorks RDX160 External
Removable Disk Backup System NOTE: 160GB of Disk Storage
10647 G2 (47U) Rack Cabinet 1200mm
Deep - Shock Pallet NOTE: Due to handling and shipping
requirements, AF044A is only orderable through HP Factory Express. It is
not for direct sales. Customer site surveys are required before an order
is approved. CTO orders may require additional lead time.
AF044A
10647 G2 (47U) Rack Cabinet 1200mm
Deep - Pallet
AF045A
NOTE: xxxxxx-B22
(shock pallet) used to ship racks with equipment installed (by custom systems,
VARs and Channels). NOTE: It is mandatory to use a shock pallet in order to ship racks
with equipment installed.
NOTE: Cat5e cables
are required to connect Interface Adapters to Console Switches. Cat5e cables
can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
NOTE: Cat5e cables
are required to connect Serial Adapters to Serial Console Servers. Additional
Serial Adapters and Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
Rack Kit
Rack Adapter Kit NOTE: This kit allows HP rack servers
to fit in racks that are 24" wide.
332815-B21
USB
Options
USB 1.44-MB External Diskette
Drive (Carbonite)
DC141B
HP 1GB USB 2.0 Floppy Drive
Key
442085-B21
Service
and Support Offerings
(HP Care Pack Services)
Hardware Services On-site Service
Next Business Day On-site Service,
5-Day x 9-Hour Coverage, 3 Years, Electronic
U4479E
NOTE: To attach
3 year, 4-Hour On-site Service to Smart Buy servers, Smart Buy Care Packs
must be used. For other service levels, order standard Care Pack part numbers.
4-Hour On-site Service, 5-Day
x 13-Hour Coverage, 3 Years, Electronic
U4480E
4-Hour On-site Service, 7-Day
x 24-Hour Coverage, 3 Years, Electronic
U4481E
NOTE:
Use one of the following Smart Buy Care Packs to attach 3 year, 4-Hour On-site
Service to Smart Buy servers. For other service levels, order standard Care
Pack part numbers.
DL320 Smart Buy 4-Hour On-site
Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
UE889E
DL320 Smart Buy 4-Hour On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UE890E
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
U4482E
Installation & Start-up
Services
Hardware Installation, Electronic
U4490E
Installation & Start-Up of
a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl.
HP holidays, Electronic
U4491E
Support Plus
Onsite HW support, 8am-9pm, M-F,
4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion,
8am-9pm, M-F 2hr response time excl. HP holidays, Electronic
U4492E
Support Plus 24
Onsite HW support 24x7, 4hr response
and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic
U4493E
Onsite HW support 24x7, 4hr response
and SuSE Linux SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic.
U6309E
Onsite HW support 24x7, 4hr response
and Red Hat ES Linux SW Tech support offsite, onsite at HP's discretion,
24x7 2hr response time incl. HP holidays, Electronic.
NOTE: Memory configurations listed do not apply to "Factory Integrated
Models".
Standard
Memory NOTE: One of the following
depending on model: 1 GB installed (1 x 1 GB SDRAM DIMM) on Dual-Core
(3075 and E3110) models. 2 GB installed (2 x 1 GB SDRAM DIMMs) on Quad-Core
(X3320 and X3210) models.
Standard Memory Plus Optional
Memory Up to 8 GB memory is available with the optional installation of
PC2-6400 ECC DDR2 SDRAM Memory kits.
NOTE:
The chart below does not represent all possible configurations. For best performance,
HP recommends dual-bank interleaved mode configurations. For dual-bank interleaved
mode, DIMMs must be installed in both banks with equal bank capacities.
Optical
Drive Bay: Optional 12.7mm DVD-ROM, or DVD-RW drive
1- 4
Four SATA or SAS drive bays
A
Optical
Drive Bay: Optional 9.5mm DVD-ROM, or DVD-ROM/CD-RW Combo drive
Drive Support
Quantity
Supported
Position
Supported
Controller
Removable Media
2 Drive Models:
12.7mm IDE DVD-ROM or DVD-RW Drive
Up to 1
A
HP embedded SATA Controller
4 Drive Models:
9.5mm IDE DVD-ROM or DVD-ROM/CD-RW Combo Drive
Up to 1
A
HP embedded SATA Controller
HP Slim SATA DVD-ROM Optical Drive
HP Slim SATA DVD RW Optical Drive
Up to 1
A
HP embedded SATA Controller
Hard Drives NOTE: Transfer rates of drives are
dependent on the maximum transfer rate supported by the HBA or Controller.
Refer to the HBA or Controller technical specifications for details.
SAS Hot Plug 3.5"
Enterprise (ENT) Drives
Quantity
Supported
Position
Supported
Controller
450GB 3G SAS 15K DP
400GB 3G SAS 10K DP
300GB 3G SAS 15K DP
146GB 3G SAS 15K DP
72GB 3G SAS 15K DP
Up to 2
Up to 4 NOTE: depending on model.
1-2
1-4 NOTE: depending on model.
HP embedded 4 Port SATA Controller
with RAID 0/1 support
HP SC44Ge Host Bus Adapter NOTE: When using the SC44Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5
Gb/s SATA, 3 Gb/s SAS.
HP 8 Internal Port SAS HBA with RAID NOTE: Transfer rate: 1.5 Gb/s SATA,
3 Gb/s SAS.
HP Smart Array E200/128 BBWC Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P800/512MB BBWC Controller
SAS Hot Plug 3.5"
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
1TB 7.2K DP SAS
750GB 7.2K DP SAS
Up to 2
Up to 4 NOTE: depending on model.
1-2
1-4 NOTE: depending on model.
HP embedded 4 Port SATA Controller
with RAID 0/1 support
HP SC44Ge Host Bus Adapter NOTE: When using the SC44Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5
Gb/s SATA, 3 Gb/s SAS.
HP 8 Internal Port SAS HBA with RAID NOTE: Transfer rate: 1.5 Gb/s SATA,
3 Gb/s SAS.
HP Smart Array E200/128 BBWC Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P800/512MB BBWC Controller
SATA Hot Plug 3.5"
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
1TB 3G SATA 7.2K
750GB 3G SATA 7.2K
500GB 3G SATA 7.2K
250GB 3G SATA 7.2K
Up to 2
Up to 4 NOTE: depending on model.
1-2
1-4 NOTE: depending on model.
HP Smart Array E200/128 BBWC Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P800/512MB BBWC Controller
SATA Hot Plug 3.5"
Entry (ETY) Drives
Quantity
Supported
Position
Supported
Controller
160GB 3G SATA 7.2K
Up to 4
1-4
HP Smart Array E200/128 BBWC Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P800/512MB BBWC Controller
3.5" SATA Hot Plug
Drives
Quantity
Supported
Position
Supported
Controller
750GB 1.5G SATA 7.2K
500GB 1.5G SATA 7.2K
250GB 1.5G SATA 7.2K
160GB 1.5G SATA 7.2K
Up to 4
1-4
HP SC44Ge Host Bus Adapter NOTE: When using the SC44Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5
Gb/s SATA, 3 Gb/s SAS.
HP 8 Internal Port SAS HBA with RAID NOTE: Transfer rate: 1.5 Gb/s SATA,
3 Gb/s SAS.
HP Smart Array E200/128 BBWC Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P800/512MB BBWC Controller
NOTE:
Hot plug capability and drive LED status support requires installation of
one of the controllers or HBAs listed above.
HP
StorageWorks USB Tape Drives, External DAT 40 USB DAT 72 USB
DAT 160 USB 1U USB Rack-Mount Kit
External
USB 2.0 Port
N/A
HP
StorageWorks SAS Tape Drives, External DAT 160 SAS LTO-2 Ultrium
448 SAS LTO-3 Ultrium 920 SAS LTO-4 Ultrium 1760 SAS LTO-4 Ultrium
1840 SAS 1U Rack-Mount Kit 3U Rack-Mount Kit
- Click on the system of interest. Example: DL320 G5p
- Follow the instructions of the next screens.
Power Supply Output (per power supply)
Rated Steady-State Power
400 W (at 100 VAC), 400 W (at 200 VAC)
Maximum
Peak Power
400 W (at 100 VAC),
400 W (at 200 VAC)
System
Inlet Temperature
Operating
10°
to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C
per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of
3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the type and number of options
installed. System performance may be reduced if operating with a fan fault
or above 30°C (86°F).
Non-operating
-30°
to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative
Humidity (non-condensing)
Operating
10
to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature,
non-condensing.
Non-operating
5
to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature,
non-condensing.
Altitude
Operating
3050
m (10,000 ft). This value may be limited by the type and number of options installed.
Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144
m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and declared average
bystander position A-Weighted sound pressure levels (LpAm) when the product is
operating in a 23°C ambient environment. Noise emissions were measured in
accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA
109).
Idle
LWAd
6.30
B
LpAm
52.07dBA
Operating
LWAd
6.38
B
LpAm
52.77 dBA
Emissions
Classification (EMC)
FCC
Rating
Class A
Normative
Standards
CISPR 22; EN55022; EN55024;
FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3;
EN 60950-1; IEC 60950-1
NOTE:
Product conformance to cited product specifications is based on sample (type)
testing, evaluation, or assessment. This product or family of products is eligible
to bear the appropriate compliance logos and statements.
Supports multiple logical
volumes
Setup through ROM based Array Configuration Utility
Installation scripting support NOTE: This controller does not support
Hot Plug functions or LED functions.
RAID OS Support
Microsoft Windows Server
2003 NOTE:In
order to implement integrated SATA RAID with Smart Start 7.90 on Windows
2000/2003, the use of a floppy drive is necessary.
Linux (Red Hat, SuSE, UnitedLinux)
Embedded NC326i Dual Port Gigabit Server Adapter
Network
Interface
10Base-T/ 100Base-TX/
1000Base-TX
Compatibility
IEEE
802.3 10Base-T
IEEE
802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer Method
Four
lane (x4), 100MHz PCI Express Reference Clock
Network
Transfer Rate
10Base-T (Half-Duplex)
10
Mb/s
10Base-T (Full-Duplex)
20
Mb/s
100Base-TX (Half-Duplex)
100
Mb/s
100Base-TX (Full-Duplex)
200
Mb/s
1000Base-TX (Half
and Full-Duplex)
2000 Mb/s
Connector
RJ-45
Cable Support
10Base-T
Categories
3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX
Category
5 UTP; up to 328 ft (100 m)
Environment-friendly Products and Approach
End-of-life
Management and Recycling
Hewlett-Packard
offers end-of-life HP product return, trade-in, and recycling programs in many
geographic areas. For trade-in information, please go to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will be recycled,
recovered or disposed of in a responsible manner.
The EU WEEE directive
(2002/95/EC) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly
instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
DL QuickSpecs
US QuickSpecs 
450260-B21
